Microwave Flow Meter

Description

The Microwave Flow Monitor is a solid flow sensor with the microwave technology. It can monitor the relative balance of flow rates in multiple bran chpipes divided from a main pipe and since the total flow rate of branch pipes and the one of a main pipe are monitored, it is possible to check the balance of flow rate and control the flow rate. Also it can be applied to various solids and since there is no protrusion inside pipe, no clogging will occur. Further it can be used for the various applications such as a combustion boiler, a blending bin and a distribution system.

 

  • With use of multiple units, flow rate monitoring is possible for individual pipes.
  • Sinceindividual flows are monitored, it is possible to monitor the rate even with dozens of branch Pipes.
  • The use of microwave technology enables no projections inside the pipes.
  • High accuracy assured as the density level and flow rates are detected by microwave.
  • Applicable for pipe diameters up to 200 mm.
  • Easily mounted with a one inch screw, even on existing pipes.

 

Model

MWFM-AN-01

Power Supply

80 VAC to 240 VAC at 50/60Hz

Detection Method

Outputs powder flow rate detected by using microwave based on the doppler effect

Frequency

24GHz

Oscillation Power

Approx 6.6 mW or less

Relative Rate Accuracy (Repeatability)

±5% (with stable Powder property)

Output

Current Output 4 mA to 20 mADC (Optional Setting Possible) Max. Load resistance 600Ω at fault, analog output drops to 0mA

 

Allowable Temperature

-20°C ~ +80°C (Measuring object)

Ambient Temperature

-10°C to 55 °C

Allowable Pressure

Max. 0.5 Mpa

Mounting

Gl Screw

Protection

IP65

Coating Color

Munsell 7.5GY6/ 10

Mass

Approx 1.8kg

 

  • Monitoring for pneumatic conveyance pipe system.

Fields marked with * are mandatory fields.

:
:
:
:
:
:
:
:
:




Can't read the image? click here to refresh

Back to Top