Belt Tear Detector

Description

Belt Tear Detector immediately detects conveyor belt tear accident caused by foreign substance piercing the conveyor belt at the outlet of chute of conveyor, in order to stop the belt conveyor. Belt Tear Detector consists of sensor to detect the belt tear accident and transducer to output breakage signal. Belt Tear Detector is high safety sensor since the transducer is equipped with wire-breakage alarm output to detect the breakage of cable of sensor. Sensors are installed according to the number of Impact Rollers. Since the wiring is loop connection between sensors and to transducer, it is possible to save the wiring cost.

 

  •  Instant detection of conveyor belt logitudinal tears.
  •  Keep High operating sensitivity.
  •  Easy Installation

 

 

 

 

 

 

Specification of Detector

Item

Specification

Type

SCPT - a: Belt Width

            b: Trough angle

Protection

IP55

Allowable Temperature

-10 to +50°C

Belt width*

750 to1,800 mm

Tough angle *

20°, 30°, 35°, 45°

Sensor Type

CB807

Finish color

MUNSELL 7.5 GY 6/10

Specification of Transducer:

Item

Specification

Type

AEDC-12LC2

Protection

IP40

Allowable Temperature

-10 to +50°

Futction

Output self- holding type

Wire-breakage alarm

Delay Time

0.5 to 9 Sec.

Casing material

Polycarbonate

Power

90 to 245V, 50-60Hz

Output

Detection 1c, Alarm 1a

Contact Capacity

AC 250V 2A

Indicating Lamp

Power, Detect, Alarm

Wiring Distance from sensor

1km max.

Weight

0.4kg

 

In various industries such as Cement, Metal, Power and Glass for conveyor belt safety.

Fields marked with * are mandatory fields.

:
:
:
:
:
:
:
:
:




Can't read the image? click here to refresh

Back to Top