Ti 40/45 (-20º to 1200º) | Thermal Imagers

The versatile choice for maintenance and production engineers and technicians The Fluke Ti4x models feature everything needed for virtually every thermography task. With a 160 x 120 detector and a temperature sensitivity down to 0.08°C (80mK) (NETD) they deliver high resolution images where even the smallest temperature differences can be seen. The units are extremely easy to use through the Windows® CE menu structure and offer an extended troubleshooting feature set to allow on the spot analysis in the field.

The FT models feature the innovative IR-Fusion® technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.

Predictive maintenance – Identify electrical and mechanical problems before they cause failure
Industrial maint-enance – Check whether repairs have been performed successfully
Quality control – Examine prototypes and refine thermal management designs
Process monitoring – Real-time observation to ensure efficient and safe operation

FEATURES
SPECIFICATIONS
APPLICATIONS
Brochure/Documents

See exactly what you are viewing

Fluke IR-Fusion® technology links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.

Large, sharp thermal images

Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation

The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Make anomalies visible

Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.

Analysis and reporting comes standard

The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.

Radiometric measurement – the ‘data behind the picture’

Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.

Imaging performance

Thermal Field of view (FOV)*	20 mm lens 23 ° x 17 ° FOV 10.5 mm lens 42 ° x 32 ° 54 mm lens 9° x 6°
Spatial resolution (IFOV)*	2.60 mrad
Min focus distance*	0.15 m
Thermal sensitivity (NETD)	Ti45: ?0.08 °C(80 mK) at 30 °C Ti40: ?0.09 °C (90 mK) at 30 °C
Detector data acquisition / Image frequency*	30 Hz/60 Hz
Focus	SmartFocus; one finger continuous focus
IR digital zoom	Ti45: 2x
	Ti40: -
Detector type	160 x 120 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer
Spectral band	8 µm to 14 µm
Digital image enhancement	Automatic full-time enhanced
On-camera operating modes	Ti45: Full thermal, full visual light or merged thermal-visual images. Picture-in-Picture
	TTi40: Full thermal or full visual light. Merge thermal-visual images SmartView software. Picture-in-Picture
Visible light camera	1280 x 1024 pixels, full color
Visible light digital zoom	Ti45: 2x
	Ti40: -

Temperature measurement

Calibrated temperature range	Ti45: -20 ?C to 600 ?C (-4 to 1112 ºF) in 3 ranges Ti40: -20 ?C to 350 ?C (-4 to 662 ºF) in 2 ranges
Range 1	Ti45: -20 ?C to 100 ?C (-4 to 212 ºF)
	Ti40: -20 ?C to 100 ?C (-4 to 212 ºF)
Range 2	Ti45: -20 ?C to 350 ?C (-4 to 662 ºF)
	Ti40: -20 ?C to 350 ?C (-4 to 662 ºF)
Range 3	Ti45: 250 ?C to 600 ?C (482 to 1112 ºF)
	Ti40: -
Optional - High temperature	Ti45: Up to 1200 ?C (2192 ºF) Ti40: -
Range 4	Ti45: 500 ?C to 1200 ?C (932 to 2192 ºF)
	Ti40: -
Accuracy	±2°C or 2 % (whichever is greater)
Measurement modes	Ti45: Centerpoint, center box (area min/max, average), moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below
	Ti40: Centerpoint, center box (area min/max, average)
Emissivity correction	0.1 to 1.0 (0.01 increments)

Image presentation

Digital display	5" large high-resolution digital display
LCD backlight	Sunlight readable color LCD
Video output	RS170 EIA/NTSC or CCIR/PAL composite video
Palettes	Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted

Optional lenses (only available at time of original purchase)

54 mm Telephoto lens	High precision Germanium lens
Field of view (FOV)	9º horizontal x 6º vertical
Spatial resolution (IFOV)	0.94 mrad
Min focus distance	0.6 m
10.5 mm wide angle lens	High precision Germanium lens
Field of view (FOV)	42 º horizontal x 32 º vertical
Spatial resolution (IFOV)	4.9 mrad
Min focus distance	0.3 m

Image and data storage

Storage medium	Compact flash card stores over 1000 IR images (1 GB card standard)
File formats supported	14 bit measurement data included. Exportable JPEG, BMP, PNG, GIF, TIFF.

Interfaces and software

Interface	Compact flash card reader included
Software	SmartView; Full analysis and reporting software included

Laser

Classification	Class II
Laser targeting	Laser dot visible on screen when blending thermal and visible image

Controls and adjustments

Set-up controls	Date/time, temperature units C/F, language, scale, LCD intensity (high/normal/low)
Image controls	Level, span, auto adjust (continuous/manual)
On-screen indicators	Battery status, target emissivity, background temperature and real time clock

Power, battery life

Battery type	Li-Ion smart battery, rechargeable, field-replaceable)
Battery operating time	3 hours continuous operation (2 hours with IR-Fusion engaged)
Battery charging	2 bay intelligent charger powered via AC outlet
AC operation	AC adapter 110/220 VAC, 50/60 Hz (Ti45 only)
Power saving	Automatic shutdown and sleep modes (user specified)

Environmental and mechanical design

Operating temperature	-10 °C to +50 °C (14 °F to 122 °F)
Storage temperature	-40 °C to +70 °C (-40 °F to 158 °F)
Relative humidity	Operating and storage 10% to 95%, non-condensing
Water and dust resistant	IP54
Weight (including batteries)	1.95 kg (4.3 lbs)
Camera size (HxWxD)	162 x 262 x 101 mm (6.5" x 10.5" x 4.0")
Warranty	2 Years