M530 LYNX | High Temp. CCTV System

The M530 Series of Visible Light High-Temperature Color Cameras is designed to give you the flexibility to customize electronics, lenses, filters and other options to provide continuous monitoring of your high temperature internal processes. Straight, oblique, or right angle lens tube options are available that offer more flexibility in mounting the camera. Add an M721 remote auto iris to adjust the camera iris from the comfort of the control room providing a clear picture from start-up to full load. Imaging

FEATURES
SPECIFICATIONS
APPLICATIONS
Brochure/Documents

Rotary Kilns & Coolers

Provides continuous product quality monitoring. Observe ring formation, burner flame and product as it moves down the kiln or cooler. See potential Upsets early.

Coal Fired Utility Boilers

Monitor flame shape to adjust burners for maximum combustion & minimum fuel usage.

Bark Fired Boiler

Observe fuel distribution, bed & feeder monitoring, combustion & flame characteristics.

Glass Melt Tanks

View for flame impingement & monitor the crown for dripping. Easily see batch load, flow pattern & any un-melted surface material.

CAMERA
Power Requirement	85-265 VAC, 47-440 Hz
Camera Detector	1/2” solid state color image sensor
System Resolution	>450 lines
Video	1.0 V p-p, 75 ohm, CCTV signal /VTN: RS170- NTSC or /VTP: CCIR-B-PAL video timing
Serial Communication	RS485 full duplex, non-addressable
Control	/AIN: Manual focus and iris adjustment on back /AIR: Remote iris adjustment with M721 Remote Auto Iris Controller

LENS
Construction	Air or water cooled 304 stainless steel outer shroud. Sapphire window for maximum environmental protection.
Lens Options	/L: Straight view, /RAL: right angle with 90° offset optics, /OAL: oblique angle with 45° offset optics, /WCL: water cooled
Lengths	STD /L30: L=27.7” (704mm) or /OAL30: L=26.7” (678mm) Other lenses available. Please contact your sales representative.
Field of View	Wide: 75°H x 56°V Medium: 60°H x 45°V Narrow: 35°H x 26°V
Diameter	/L: 38mm (1.5”) /RAL & /OAL: 51mm (2.0”) /WCL: 57mm (2.25”)
Cooling Requirements	Instrument quality air, 12-19 dm3/sec (25-40 SCFM) @ 5-15 psig (34-103 kPa) required for straight view lens (to ISO 8573-1, Class 1• 7• 2)
Environment	1621°C (2950°F) with proper cooling
Thermocouple	/TJ: Type J thermocouple option /TK: Type K thermocouple option

ENCLOSURE
Construction	CEI: Corrosion-resistant, insulated,air-cooled, NEMA 4; /CEW: Corrosion-resistant, water cooled, NEMA 4
Cooling Type	CCP: Air purged with check valve, 1 SCFM @ 2 PSI (0.5 dm3/sec 14 kPa) /CCV: Vortex cooling 25 SCFM @100 PSI (13 dm3/sec @ 690 kPa); Instrument quality air required.
Ambient Environment	Max. 140°F (60°C) with negligible radiant heat load. Water cooled option available to handle high radiant heat environment

MECHINICAL
Video Output Jack	Female PL-259 “UHF” type
Power input Jack	Removable waterproof miniplug (JOY type TP, female 3-conductor; mating power cord provided)
Enclosure Cooling Input	1/4” brass quick-disconnect nipple; mating coupler (Snaptite BVHC4-4F) provided
Lens cooling Input	1/2” brass quick-disconnect nipple; mating coupler (Snaptite BVHC8-8F) provided
Weight	30 pounds (14kg) for air-cooled configuration (lens and camera)