The ultimate tool for troubleshooting and maintenance This thermal imager is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others. IR-Fusion® Technology See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on Ti10 models.
- Enhanced problem detection and analysis capabilities with IR-Fusion® Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images.
- Optimized for field use in harsh work environments.
- Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?
- Withstands dust and water—tested to an IP54 rating.
- Delivers the clear, crisp images needed to find problems fast.
- Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).
- Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
- Everything needed to get started is included.
- Adjustable hand strap for left-or right-handed use.
- Everything needed to get started is included.
Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software.
- Manufactured in the U.S.A.
Specifications
| Temperature |
Temperature measurement range
(not calibrated below -10 °C) |
-20 °C to +250 °C (-4 °F to +
482 °F) |
| Accuracy |
± 5 °C or 5 % (whichever is
greater) |
|
| Imaging performance |
| Field of view |
23° x 17° |
| Spatial resolution (IFOV) |
2.5 mRad |
| Minimum focus distance |
Thermal lens: 15 cm (6 in)
Visible (visual) light lens: 46 cm
(18 in) |
| Focus |
Manual |
| Image frequency |
9 Hz refresh rate |
| Detector type |
160 X 120 focal plane array,
uncooled microbolometer |
| Infrared lens type |
20 mm F = 0.8 lens |
| Thermal sensitivity (NETD) |
≤ 0.2 °C at 30 °C (200 mK) |
| Infrared spectral band |
7.5 μm to 14 μm |
| Visual camera |
640 x 480 resolution |
|
| Image presentation |
| Palettes |
Ironbow, blue-red, high contrast,
grey |
| Level and span |
Smooth auto-scaling and manual scaling
of level and span |
| Minimum span (in manual mode) |
5 °C (9 °F) |
| Minimum span (in auto mode) |
10 °C (18 °F) |
| IR-Fusion® information |
Full infrared or picture-in-picture |
| Picture-In-Picture (PIP) |
100 % IR displayed in center 320
x 240 pixels |
| Full screen (PIP off) |
100 % IR displayed in center 640
x 480 LCD |
|
| Image and data storage |
| Storage medium |
SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each or 3000 basic (.bmp) IR images) |
| File formats |
Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp) files |
| Export file formats w/SmartView™ software |
JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF |
|
General specifications
| Temperature |
Operating: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to +50 °C (-4 °F to 122 °F) without batteries
|
| Relative humidity |
10 % to 90 % non-condensing |
| Display |
9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) |
| Controls and adjustments |
User selectable temperature scale (°C/°F)
Language selection
Time/Date set
|
| Software |
SmartView™ full analysis and reporting software included |
| Power |
| Battery: |
Internal rechargeable battery pack (included) |
| Battery life: |
Three to four hours continuous use (assumes 50 % brightness of LCD) |
| Battery charge time using ac adapter/charger and dc car charger: |
Two hours for full charge |
|
| AC operation/charging |
AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges
battery while imager is operating. Universal ac mains adapters included. |
| Power saving |
Sleep mode activated after 5 minutes of inactivity, automatic power off
after 20 minutes of inactivity |
| Safety standards |
| CE Directive: |
IEC/EN 61010-1 2nd Edition Pollution Degree 2 |
|
| Electromagnetic compatibility |
| EMC directive: |
EN61326-1 |
| C-Tick: |
IEC/EN 61326 |
| US FCC: |
CFR 47, Part 15 Class A |
|
| Vibration |
2 G, IEC 68-2-29 |
| Shock |
25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} |
| Dimensions (HxWxL) |
0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) |
| Weight |
1.2 kg (2.65 lb) |
| IP rating |
IP54 |
| Warranty |
Two-years |
| Calibration cycle |
Two-years (assumes normal operation and normal aging) |
| Supported language |
English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanes |
- Inside Electrical distribution & Service (Switchgear & Panels)
- Motors, Pumps, etc
- Process- Tanks, Pipes
- HVAC
- Outside Electrical Utilities
|
