Vibration Monitoring

The EN2000A1 vibration monitoring device is a dual-channel vibration monitoring meter, which can monitor the radial vibration to a high level of accuracy, predict the vibration increment caused by unbalance, misalignment, part loose and provides comprehensive protection for generating units.

The recorded outputs can be stored as analog signals and RS-485 communication interface is also provided.

FEATURES
SPECIFICATIONS
APPLICATIONS
Brochure/Documents

EN2000A1 vibration monitoring device can receive the signals from two sensors (eddy current sensor or velocity sensor).
The vibration can be monitored continuously by two separate channels and the parameters of each channel can be configured independently as required.
RS-485 communication interface is provided and multi-machine communication is supported, facilitating the networked management of multiple meters.
The parameter setup or function selection of the meter can be undertaken using the buttons on the front panel or by communication with the central server computer, and password is needed for administration authority.

PARAMETERS		SPECIFICATIONS
Channel Number		2 Channel.
Input Impedance		>50KΩ
Measurement Range	Eddy current sensor	0-999μm P-P value
	Speed Sensor	0-50.0 mm/s(RMS value), 0-500μm P-P value
	Acceleration sensor	0-100 mm/s, 0-200m/s2
	peed Sensor	±0.2% FS±1 Character
Output Mode		0-10mA/4-20mA/0-20mA
Alarm Points		2 alarm set points
	Alarm setting point	0-100 FS
	Alarm Delay	0-9 Seconds
	Alarm reset	self-locking and automatic reset
Relay Capacity		250VAC/1A or 30VDC/2A
Communication		RS485
Working Environment		0-50 Humidity ≤85%, No dew
Installation Mode		Card Dish Pack
Working Power		110-200VAC/50-60Hz or 24-32VDC/td>
Power Dissipation		≤10W
External Dimension		>160mm(width) × 80mm(height) ×120mm(depth)
		Casing Size-152mm width ×76mm height