DPM-6 Digital Indicator is especially applicable to some of the occasion only requiring display and transmission of measurement values. It can support various kinds of thermocouples, thermal resistance and linear signal input,with ultra measurement ranges, power disconnection, interrupted resistance and couple disconnection indication functions,with 4-20mA transmission PV(measurement value),SV(set value)function.
- Large LED display (0.8 inch) for PV
- 4 digit display for units (e.g. ºC, psi etc)/ configuration
- Universal Input (TC/ RTD/ mA/ mV/ V)
- Self Diagnosis Function:Input fails safe operation.
- Programmable input, range & alarms
- 4 Alarms in 10 modes
- Multiple level keyboard locking function
- 24 VDC Power supply for 2-wire transmitter
- High accuracy & fast sampling, μP based
- Communication RS485/ MODBUS
- Isolated re-transmission signal, upto 2 nos.
- EMI /ESD protection; CE approved
| INPUT | Thermocouple | K, J, R, S, B, E, T& N | | RTD | Pt100, Cu50 | | Voltage | 1 – 5 V, 0 – 5 V, 0 – 50 mV, 0 – 1 V | | Current Signals | 0-10mA, 4-20mA, 0-20mA | | MEASURING ACCURACY | ± 0.2% FS ±1 Digit, typical | | RESOLUTION | T/C: 1°C ( 0.1 upto 999.9 ºC )/ RTD: 0.1°C | | SAMPLING TIME | 500mS (T/C & RTD) , 400 ms (V, mV, mA) | | OUTPUT (Optional) | Linear Retransmission output | 4-20mA , upto 2 nos (Isolated ) | | ALARM RELAY RATING | 3 Amp/ 250 VAC, resistive load | | TRANSMITTER POWER SUPPLY (Optional) | 24V DC/ 50 mA, Isolated | | TCOMMUNICATION(Optional) | RS485 - ASCII Protocol/ MODBUS | | POWER SUPPLY | 85 - 265 VAC, 15 – 50 V DC (Optional) | | PV | 4 digit 7 segment, Red 20 mm (0.8”) | | Units/ Configuration | 4 digit 7 segment, Green 7 mm (0.28”) | | BEZEL SIZE (WXH) | 96 x 48mm |
MODEL SELECTION-
DPM-6-00A-BC0-DE
| ITEMS |
SPECIFICATIONS |
CODE |
DETAILS |
|
DPM-6 |
|
DIGITAL INDICATOR |
| A |
ALARMS (Refer Note -1) |
0 |
No Alarm |
| 1 |
One Relay Contact 3A, 230 VAC |
| 2 |
Two Relay Contact 3A, 230 VAC |
| 3 |
Three Relay Contact 3A, 230 VAC |
| 4 |
Four Relay Contact 3A, 230 VAC |
| B |
RETRANSMISSION OUTPUT
(Refer Note -2 )
|
0 |
None |
| 1 |
1 nos 4-20mA Retransmission Output (Isolated) |
| 2 |
2 nos 4-20mA Retransmission Output (Isolated) |
| 3 |
Other Linear Signals) |
| C |
INPUT SIGNAL (REFER NOTE -3)
(Refer Note -2 )
|
1 |
T/C |
| 2 |
Pt-100 |
| 3 |
Cu 50 |
| 4 |
4-20mA DC |
| 5 |
Other Linear Signal |
| D |
COMMUNICATION
(Refer Note -2 )
|
0 |
None |
| 1 |
RS485 |
| 2 |
Mod bus |
| E |
ADD-ONS
(Refer Note -2 )
|
0 |
None |
| 1 |
24 VDC 2 wire Transmission Power Supply |
NOTES-
- 1. When ordered without retransmission output one or two alarm relay are SPDT type, three or four alarm relay are SPST type.
- 2. (a) Only one 4-20mA retransmission output is available with three alarm relay model
- (b) Only one 4-20mA retransmission output is available with two SPDT alarm relay model.
- (c) Two 4-20mA retransmission output is available with two alarm relay in SPST type instead of SPDT.
- (d) 4-20mA retransmission output is not available with Four Alarm Models.
- 3. Please specify input type and range to be configured.
- 1.This indicator/controller is widely used in temperature measurements.
- 2. It is used as an indicator for indication of the temperature in various industrial applications.
- 3.It is also used in the process of the temperature in control system etc.
|
DPM6(Digital Indicator DP 600)