Process Calibrator High Accuracy IT54.44

High Accuracy of 0.02% for source
6 digits display for source.
A dual Liquid Crystal Display
White LED for backlight
Temperature Coefficient: 0.1 times the applicable accuracy,specification per degree C for 5 to 18 and 28t o 50.
The range of the internal temperature compensation sensor is from 0 to 40, Compensation error ≤±0.5 .
The accuracy of the temperature probe: ±0.2.
The range of the measured temperature is form -20-100.
Maximum voltage between any output terminal and earth: 30Vp-p
Maximum output current: Approximately 25mA.

TECHNICAL DATA (Output function)
Function	Reference	Range	Resolution	Accuracy	Remark
Thermo- couple	R	0°C~ 1767°C	1°C	0~ 100:1..5°C	By using ITS-90 temperature scale; The accuracy does not include the error of internal temperature compensation caused by a sensor;
				0~ 100:1..5°C
	S	0°C~ 1767°C	1°C	0~ 100:1.5°C
				100~ 1767: 1.2°C
	B	600°C~ 1820°C	1°C	600~ 800:1.5°C
				800~ 1820: 1.1°C
	E	-200.0°C~ 1000.0°C	0.1°C	-200.0~ -100.0°C: 0.6°C
				-100.0600.0: 0.5°C
				600.01000. 00.4°C
	K	-200.0°C~ 1372.0°C	0.1°C	-200.0- 100.0 0.6°C
				-100.0400. 0 0.5°C
				400.01200. 0 0.7°C
				1200.01372. 00.9°C
	J	-200.0°C~ 1200.0°C	0.1°C	-200.0-100. 00.6°C
				-100.0800.0: 0.5°C
				800.01200. 00.7°C
	T	-250.0°C~ 400.0°C	0.1°C	-250.0~400°C. 0:0.6°C
	N	-200.0°C~ 1300.0°C	0.1°C	-200.0-100. 0°C:1.0°C
				-100.0~ 900.0°C :0.7°C
				900.0~ 1300.0 °C:0.8°C
	L	-200.0°C~ 900.0°C	0.1°C	-200.0~ 0.0°C:0.7°C
				0.0~ 900.0°C:0.5°C
	U	-200.0°C~ 600.0°C	0.1°C	-200.0~ 0.0°C:0.7°C
				0.0~ 600.0°C:0.5°C

Function	Reference	Range	Resolution	Accuracy	Remark
DC voltage	100mV	-10.000110. 000mV	1µV	0.02+0.01	Maximum output: 0. 5mA
	1000mV	-100.001100.00mV	10µV	0.02+0.01	Maximum output: 2mA
	10V	-1.000011.0000V	0.1mV	0.02+0.01	Maximum output: 5mA
DC current	20mA	0.000mA22.000mA	1µA	0.02+0.02	Simulator transmitter: 5–28V power supply outside; 1KO at 20mA
Resistance	400O	0.00O400.00O	0.01O	0.02+0.02	Excitation current: ± 0.5–3 mA; if ± 0.1–0.5mA, add 0.1O;Does not include lead resistance;
	4KO	0.0000 KO4.0000 KO	0.1O	0.05+0.025	Excitation current: ±0.05 –0.3mA; Does not include lead resistance;
	40KO	0.000 KO40.000 KO	1O	0.1+0.1	Excitation current: ±0.01mA; Does not include lead resistance;
RTD	Pt100 385	-200.0800.0	0.1	-200.00.0 0.3	By using temperature scale ITS-90 Excitation current: ±0.5±3mA for Pt100, Cu10, Cu50, add 0.5 when excitation current is ±0.1mA-0.5mA; Excitation current: ±0.05mA ±0.3mA for PT200, PT500, PT1000; Does not include lead resistance.
				0.0400. 0: 0.5
				400.0800. 0 0.8
	Pt200 385	-200.0630 .0		-200.0100 .0: 0.8
				100.0300 .0 : 0.9
				300.0630 .0: 1.0
	Pt500 385	-200.0630.0		-200.0100.0: 0.4
				100.0300.0: 0.5
				300.0630. 0 0.7
	Pt1000 385	-200.0630.0		-200.0100. 0 0.2
				100.0300. 00.5
				300.0630. 0 0.7
	Cu10	-100.0260.0		1.8
	Cu50	-50.0150.0		0.6
FREQ	100Hz 1KHz 10KHz	1.00Hz~ 110.00Hz	0.01Hz	±2 count	Output voltage: +1–+11 V (zero base waveform); Amplitude accuracy: ±5% reading value +0.5V; Maximum load: >100 KO; Duty Cycle: 50%.
		0.100KHz~ 1.100KHz	1Hz
		1.0KHz~ 11.0KHz	0.1KHz
	100KHz	10KHz~ 110KHz	2KHz	±5 count
PULSE	100Hz 1KHz 10KHz	1~ 100000cycles	1cyc	±2 count
SWITCH	100Hz	1.00Hz~ 110.00Hz	0.01Hz	±2 count	Contact output (with 0.0 V amplitude setting, FET switch ON/OFF) Maximum open/close voltage/current: +28 V/
	1KHz	0.100KH~ 1.100KHz	1Hz
	10KHz	1.0KHz~ 11.0KHz	0.1KHz
	100KHz	10KHz~ 110KHz	2KHz	±5 count